语言切换
Application

The difficulty in the processing of the diamond coating is high, but the cost of the diamond coating is higher, 

and the cost of the cutter is more than the cost of the cutter itself, resulting in a very expensive overall manufacturing cost. 

The ceramic cutter doesn't need a diamond coating, saves a large amount of processing cost and raw materials,

can be processed at high speed even in a high-temperature environment, realize high-efficiency rough machining of a diamond cutter

and is a new choice for high-efficiency processing.

The application of ceramic cutter end mill  to the processing of graphite

Due to the lower the affinity of the ceramic material and the graphite, the sharp and smooth edge of the cutting edge 

can improve the surface finish of the processed product, the ceramic processing is simple, and therefore, the ceramic cutter is complete. 

At the same time, the high hardness and high bending strength of the ceramic oxide ceramic are high, the cutting tool is not only wear-resistant, but also can not be easily broken during the machining process, and the service life of the cutter is long.

The application of ceramic cutter end mill  to the processing of graphite

The application of ceramic cutter end mill  to the processing of graphite


The application of ceramic cutter end mill to the processing of graphite

Completion time: 2019-07-31
0769-82058382
(24-hour national service hotline)
Copyright ©2018 - 2021. 02.28 Dongguan City West Ceramics Precision Ceramics Co., Ltd.
Follow us: